Well Water Treatment
Well Water Treatment and Filtration Systems in South Florida
Water Wizards designs and installs well water treatment systems for homes on private wells in Palm Beach, Broward and Miami-Dade County. We treat the problems South Florida wells usually have: iron stains, the rotten-egg smell of sulfur, hard water and, where a lab test finds it, bacteria.
A well system is built in stages, in the order your water needs them. An iron filter and softener runs $2,800 to $4,500 installed. A full system with iron and sulfur removal, carbon, a softener, UV and drinking water RO runs $4,000 to $7,000. A free water test at your tap shows which stages you need, and you get one written price before any work.
Built from your test
Each stage is sized to your iron, sulfur and hardness readings and your well's flow.
The right order
Iron comes out before the softener and UV, so they keep working.
One written price
Equipment, installation and startup in one figure, before work begins.
5-year warranty
Installed systems carry our 5-year warranty, and we service what we install.
Well Water Problems
Common Well Water Problems in South Florida
Private wells here draw from the shallow Biscayne and surficial aquifers, in limestone and sand. No utility treats or tests the water, so what comes out of the tap depends on your own well.
| Sign | Likely cause | Treatment |
|---|---|---|
| Orange or brown stains on fixtures, laundry and walls from irrigation | Iron (and sometimes manganese) | Air injection oxidizing iron filter |
| Rotten-egg smell, worst on hot water | Hydrogen sulfide | Iron and sulfur filter, then catalytic carbon |
| White scale, spots on dishes, short water heater life | Hardness (calcium and magnesium) | Water softener |
| A lab test finds coliform or E. coli | Bacteria reaching the well | Well disinfection, then UV sterilizer |
| Cloudy water or grit in aerators | Sand and sediment | Sediment filter |
| High nitrate on a lab test | Fertilizer, septic or animal waste | Reverse osmosis for drinking water |
Most wells have more than one of these, which is why a well system is several stages. Read more in our South Florida well water guide.
How It Works
How a Well Water Treatment System Works
Each stage protects the one after it. A typical whole house well system runs in this order:
- Sediment filter. Catches sand and grit before it reaches the other equipment.
- Iron and sulfur filter. An air injection filter adds air to the water so dissolved iron and hydrogen sulfide turn into particles the media can trap. It backwashes them out on a schedule, with no chemicals to add.
- Catalytic carbon. Polishes off any sulfur smell that's left and some organic chemicals.
- Water softener. Removes hardness. It goes after the iron filter so iron doesn't foul the resin. Well softeners are often 64,000 grains, sized to your reading and household.
- UV sterilizer. Last on the main line. It disinfects bacteria and viruses, and needs clear, iron-free water to work.
- Reverse osmosis. Under the kitchen sink, for drinking and cooking water with lower nitrates, dissolved solids and PFAS.
Not every well needs every stage. A well with iron and hardness but clean lab results may only need the first and fourth.
Testing
Testing Your Well Water
The Florida Department of Health recommends that private well owners test for bacteria at least once a year, and again after flooding, work on the well, or any change in taste, smell or color. Homes with infants should also test for nitrate, which the EPA limits to 10 mg/L in drinking water.
Our free in-home test
It checks hardness, iron, pH, TDS and hydrogen sulfide at your tap, which is what decides the equipment. Book a free water test.
Bacteria and nitrate
These need a state-certified lab. In Palm Beach County, the health department lab tests for coliform bacteria and E. coli for about $30 to $35. Broward and Miami-Dade residents can contact their county health department.
If a lab test finds bacteria, the usual first step is to disinfect the well with chlorine (shock chlorination) and retest. A UV sterilizer then protects the house going forward. See bacteria in Florida well water.
Pricing
Well Water Treatment Cost
| System | What's included | Installed price |
|---|---|---|
| Iron and hard water | Sediment pre-filter, air injection iron filter, 64,000-grain softener | $2,800–4,500 |
| Full six-stage system | Sediment and iron/sulfur filter, catalytic carbon, softener, UV sterilizer, under-sink RO | $4,000–7,000 |
| Home and barn system | Full home treatment plus treatment on the barn supply line, with high-flow UV and iron removal for troughs | $4,500–8,500 |
The price depends on your iron and sulfur levels, hardness, flow rate and how many stages you need. You get one written price after the free test, before any work starts. Financing is available.
Running costs are filter changes, softener salt and a yearly UV lamp. In Palm Beach County we can deliver softener salt for you.
Installation Process
Our Well Water Installation Process
Free water test
We test at your tap and look at any lab results you have, then ask about stains, smells and how your household uses water.
System design and written price
We pick the stages your water needs and size them to your well's flow rate and your bathrooms.
Installation
Equipment goes on the main line after the pressure tank, with a bypass valve so it can be serviced without shutting off the house. Most well systems are installed in a day.
Startup and check
We program the backwash and regeneration, check every connection, and test the treated water so you can compare it with the readings from before.
Service
We keep your filter, salt and lamp dates on file. See our filter replacement service and water system repairs.
Customer Reviews
What Our Customers Say
Google rating from 173 reviews
Service Area
Where We Treat Well Water
Private wells are most common west of State Road 7 and in rural Broward and Miami-Dade. We install well systems in places like Loxahatchee Groves, The Acreage, Jupiter Farms and Southwest Ranches, from our base in Delray Beach. See all the areas we serve.
Well Water Treatment FAQs
-
The one built from your test. For most South Florida wells that means a sediment filter, an iron and sulfur filter and a softener, with UV if bacteria are a concern and reverse osmosis for drinking water. A single cartridge filter can't handle iron, sulfur and hardness together.
-
With Water Wizards, an iron filter and softener runs $2,800 to $4,500 installed, a full six-stage system $4,000 to $7,000, and a home and barn system $4,500 to $8,500.
-
An air injection oxidizing filter is the usual whole house answer. It turns dissolved iron into particles, traps them and backwashes them out. A softener can handle a little iron, but heavier iron fouls the resin, so the iron filter goes first.
-
The smell is hydrogen sulfide. The same air injection filter that removes iron also removes it, and catalytic carbon after it takes out what's left. If the smell is only on hot water, the water heater's anode rod may be the cause. Read more about well water smells.
-
At the levels found in most home wells, hydrogen sulfide is a nuisance rather than a health risk. It does corrode plumbing and tarnish silver, and the smell makes water hard to drink, so most people treat it.
-
Shock chlorination disinfects the well and plumbing once. A UV sterilizer disinfects the water continuously as it enters the house. Many homeowners do both after a positive test, then retest.
-
At least once a year for bacteria, and after flooding, well repairs or any change in taste, smell or color. Test for nitrate if there's an infant or pregnant woman in the home. Read about nitrates in Florida well water.
-
Usually, yes. Private wells here aren't softened the way some city water is, and the limestone aquifer makes the water hard. Your hardness reading sets the softener size.
-
Sediment filters every 3 to 6 months, softener salt as needed, a UV lamp every year, RO pre-filters every 6 months and the membrane every 2 to 3 years. Iron filter media lasts several years, depending on your iron level.
-
Yes. We install treatment on barn supply lines, including iron removal for troughs and high-flow UV, as part of a home and barn system.